VSD Intern – Analog Bandgap Reference design using Sky130

Last updated 5/2021
Created by Kunal Ghosh,Anmol Purty
MP4 | Video: h264, 1280×720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + srt | Duration: 28 Lectures ( 2h 47m ) | Size: 2 GB

LIVE labs BGR Circuit design and layout using Sky130 PDKs
What you’ll learn
Basics of analog VLSI design
General purpose bandgap reference design using Sky130
Circuit design and layout concepts using Sky130
Requirements
VSD – Circuit design and SPICE simulations
VSD – Custom Layout
Description
This webinar provides detail about General Purpose Bandgap Reference. The basic working principle of Bandgap reference circuits is explained . The circuit implementation is discussed and the issues with each implementation style is mentioned. Index Terms-Bandgap Reference, CTAT, PTAT, Current mirror, OpAmp.A Bandgap Reference is a circuit which gives a constant voltage output Vref irrespective of temperature, process and supply voltage variations. It is an especially important component of several analog and mixed signal Integrated Circuits. Several circuits such as LDO, ADC, DAC, Buck convertor. use Bandgap reference as a building block. It provides a constant output reference voltage of 1.2V which is proportional to the Bandgap energy of Silicon(1.2eV)at 0K and hence, gets its name as Bandgap Reference circuitFor detailed information regarding the Bandgap Reference circuit, refer to VLSI System Design website. Below are the details we will be covering in this webinarPerformance parameters and Circuit implementation of Bandgap Reference IPBlock Diagram and SchematicSteps to download tools on your SystemPre-Layout Simulation of Bandgap Reference IP circuit using NgspiceVbgp v/s Temperature[ -40C – 140C] @ RL = 100M ohms plotVbgp v/s VDD[ 2V – 4V] @ RL = 100M ohms plotTemperature Coefficient of Vbgp v/s Temperature[ -40C – 140C] @ RL = 100M ohms plotVoltage Coefficient of Vbgp v/s VDD[ 2V – 4V] @ RL = 100M ohms plotStart-Up Time of Vbgp @ RL = 100M ohms plotOn-Off-Current of Vbgp wrt Enable @ RL = 100M ohms plotBGR Layout using MagicHope you enjoy the webinar
Who this course is for
Beginner electronics and telecommunications engineer looking to enter in analog VLSI domain
Professional Physical design and SoC designers who are curious to know about Analog IPs used in their designs
Homepage

https://www.udemy.com/course/vsd-intern-analog-bandgap-reference-design-using-sky130/