OpenRoads Designer CONNECT Edition 2022 Release 1 with Bonus | 9.3 Gb
Product:OpenRoads Designer
Version:CONNECT Edition 2022 Release 1 (10.11.00.115) with Bonus *
Supported Architectures:x64
Website Home Page :www.bentley.com
Languages Supported:english
System Requirements:Windows *
Size:9.3 Gb
The OpenBuildings development team is pleased to announce the availability of OpenRoads Designer 2022 Release 1 (10.11.00.115) is a comprehensive and fully functioned detailed design applicationfor surveying, drainage, utilities, and roadway design that supersedes allcapabilities previously delivered through InRoads, GEOPAK, MX, and PowerCivil.
OpenRoads Designer 2022 R1 (10.11.00.115) what’s new
This release is considered a "major" version:
– Data created with 2022 R 1 will need to be downgraded in order to be opened with a previous release.
– It can be installed side-by-side with previous versions.
OpenRoads Designer 2022 Release 1
This section provides a list of new features in Bentley OpenSite, OpenRoads, and OpenRail Designer CONNECT Edition products, also referred to as OpenX Designer products. Features that are only available in specific products are appropriately noted as such.
General Enhancements
– Update of Power Platform to Edition (V10.17.00.990).
– Subscription Entitlement Service (formerly CONNECT Licensing) is utilized. For more information: Subscription Entitlement Service .
– This version uses OpenFlows SewerGEMS version 10.04.00.123. More information here: What’s New in SewerGEMS, CivilStorm, StormCAD, SewerCAD, and SewerOPS CONNECT Edition Update 3 (version 10.03.04.53) – OpenFlows | Hydraulics and Hydrology Wiki – OpenFlows | Hydraulics and Hydrology – Bentley Communities
– Includes Bentley LumenRT Designer CONNECT Edition Update 14.
– Includes Bentley Descartes CONNECT Edition (V10.17.00.155).
– Update of gINT Civil Tools CONNECT Edition (V10.0.0.32).
– Support for following ProjectWise Connect Edition (V10.00.03.453).
– Includes Bentley Generative Components CONNECT Edition (V10.17.00.43).
– Updated Javarun-time engine to OpenJDK (18.0.1.1).
– Continued support for side-by-side installations of major versions. 2022 Release 1 can be installed side-by-side with earlier major versions. The second set of digits in the product version number shows the major version number. A 10.11 and 10.10 product can be installed side-by-side, but two 10.10 products cannot be installed side-by-side.
– Enhanced the Civil Feature Re-mapper tool to update terrain, geometry, corridors and template drops in a DGN file from one feature definition to another. Useful for situations such as upgrading project data from SS2/SS10 to OpenRoads Designer or moving files from one workspace to another.
– Added new Feature Definition Wizard.
– Added groups for Rail, Site, Analysis and D&U to better organize Feature Definitions in the Standards section of the Explorer.
– Enhanced the Details dialog to show categories in the header. This eliminates columns with duplicate names and makes it easier to use.
– Added documentation of Civil XML Schemas using Report Browser.
– Added support for ProjectWise Drive.
– For workspace changes please see \Configuration\Organization-Civil\Workspace Updates – 2022 Release 1.pdf included with the delivered workspace.
– New export formats are added to Export Geometry, WinALC (.geo) and SmartALC(.xgeo) formats for Plasser and Theurer tamping machines.
– New stationing formats were added to support 4 digits after + sign.
Survey Enhancements
– N/A
Geometry Enhancements
– Enhanced Station Offset and Station Base Reports to get elevations from Plain 3D elements and Survey chains.
– Enhanced Profile Intersection Point tool to allow the use of a selection set.
– Added support for exporting geometry to LandXML via key in/ script.
– Enhanced the Geometry Connector with way to set length of last and first element.
– Single Element Nudge tool now supports vertical geometry elements.
– Added Minimum Deviation Parameter to Create regression line tool.
Terrain Enhancements
– Added Gridded Elevation Difference tool between two terrains or terrain and plane.
– Added Compute Pond Volumes tool for incremental pond volumes with reporting.
– Added support for exporting terrains to LandXML via key in / script.
Modeling Enhancements
– Enhanced Cut/Fill tool with choice to delete existing meshes.
– Improved performance of Closed Mesh tool.
– Enhanced Closed Mesh tool to allow selecting closed shapes as boundaries in both 2D and 3D.
– Enhanced Closed Mesh tool to use selection sets.
– Add the ability to create, edit and manage Classification properties (formerly Semantics) from within the Create Template dialog.
– Create Coach Envelope tool now includes a choice to create Projected(2D) Swept Path envelope.
– Create Rail tool support for inclined rail profiles. 3D rail meshes are created with mirroring instead of copying the selected template.
– Added ability to use Cant Tables for cant calculations.
Drawing Production and Annotation Enhancements
– New Coordinate Grid tool for plan grid annotation.
– Added text field to include super elevation eMax in horizontal curve labels.
– Added text field to label active surface elevation at critical points (VPI, VPT) along a vertical geometry.
– Added text field to include Feature Definition Name in profile annotations.
– Added text field to label Horizontal (Projected) Length on cross section segments. This is in addition to the existing text field that labels Sloped (Actual) Length on cross section segments.
– Added ability to label the station ranges on sheets.
– Civil Labeler
. Moved label definitions into a DGNLib.
. Added ability to select multiple labels and drag to new folder.
. Added ability to import XML settings file from earlier versions into a DGNLib.
. Added ability to annotate between 2 points in a cross section.
. Added ability to override element template, dimension styles and text styles.
. Added ability to use the Active Attributes on label that does not have an Element Template defined.
. Added elongated hexagon as a frame.
. Added leader attachment points at corners (top left, bottom right, etc.) of the label.
. Added ability to lock label position to be perpendicular to a point or reference element.
Item Types Enhancements
– Added ability to calculate Station and Offset values with an expression. These expressions replace using the Asset Manager tool to compute stations and offsets.
– Added ability to calculate Latitude and Longitude with an expression.
– Enhanced Expression Builder to display civil schema and properties.
– Added ability to copy and paste the syntax for civil properties from the Properties dialog into the Expression Builder.
– Added support for hierarchical or conditional pick list.
– Added support for spaces, foreign characters and long strings in Excel column headers read by Lookup expressions.
– Added support for single source of truth to drainage nodes and conduits.
– Added configuration variable (CIVIL_QUICK_PROPERTIES_OMIT_ITEMTYPES) to control whether Item Types are displayed in the Quick Properties dialog.
– Added configuration variable (CIVIL_TOOL_SETTINGS_OMIT_ITEMTYPES) to control whether Item Types are displayed in the Tool Settings dialog.
– The product by default updates item type Last Valid Values when files are closed. This is the recommended workflow and should ONLY be overridden when a separate workflow is implemented to update Last Valid Values before taking files to other platforms such as MicroStation, iTwin, or IFC (Industry Foundation Classes). The configuration variable CIVIL_ITEMTYPE_UPDATE_LASTVALIDVALUE_ON_CLOSE can be used to override and not update Last Valid Values on close. This variable only needs to be defined to override the default behavior and stop the updates.
LVA/Signaling, Schematic and Topology Enhancements
– Topology Segments placed from end of an Edge.
– Topology model is enabled for a federated project setup.
– Added a Topology Routes property for Route Direction.
– Schematic model Edges are enabled for Drawing Production’s Named Boundary.
– Schematic model is enabled for a federated project setup.
– Point Object’s Feature Symbology is extended for Schematic model.
– New tools and features for Low Voltage Assets/Signaling:
. Added Feature Definitions: Low Voltage Assets -> Equipment, Trench and Cable .
. Tool for placing Equipment.
. Equipment extension feature for Equipment Assembly.
. Enabled Place Equipment tool for Schematic model.
. Tool for placing Trenches.
. Tool for creating a Trench from Geometry.
. Tool for placing Cable.
. Tool to update Schematic model.
. Tool for placing Clearance Point.
. User alert feature, which Equipment is updated due to geometry changes.
Drainage and Utilities Enhancements
– Implemented the Land Use Polygons available in OpenFlows 10.04.
– You can now connect a conduit to a connection point and it will trim to an intersected connection region or ring.
– You can now show the width of a conduit and the wall thickness in plan and profile.
– If a feature definition uses a prototype that is not in the DGN, it is copied from the DGNLib if it is available there.
– Added the ability to set the longitudinal slope for an inlet, instead of reading it from a terrain model or linear element.
– Added trench properties to the conduit feature definition.
– Added the ability to delete a utility project from a model in a DGN.
– You can now delineate the catchment for an existing inlet.
– You can now show multiple HGL’s on a profile or profile run.
– Enhanced catchment shapes to support curves.
– Improved performance when computing a scenario.
– Added "Set Invert to Start/Stop" functionality for Utilities, to improve functionality and for consistency with Drainage.
– Connected pipes are now drawn on a projected profile.
– You can now use Element Templates to control the symbology of the HGL and EGL.
– The Insert Node tool now updates existing profile runs.
– A prompt now asks if you want to display the Model Integrity Check if the databases have elements that aren’t in the DGN, when the DGN is opened.
– Added the ability to set the gap between multiple barrels on a conduit.
Following is the list of defects resolved in the OpenRoads Designer CONNECT Edition 2022 Release 1.
xOpenRoads Designer CONNECT Edition 2022 Release 1 with Bonus
Close
OpenRoads Designeris an extremely versatile civil design application that is used for all types and sizes of civil projects around the world. The application addresses a wide variety of complex tasks such as interchange design, roundabout design, earthworks, surveying, sanitary and stormwater network design, subsurface utilities, and production of construction staking reports. Traditional 2D methods are manual and tedious, full of communication and data gaps, leaving you frustrated, exhausted, and with a project that costs you accuracy, time, and money. From survey through plan production and construction documentation, OpenRoads Designer is the one application you need to meet project requirements on time, every time, regardless of change.
OpenRoads makes collaborating on 2D and 3D models easier and more efficient than ever. From team-level, work-in-progress collaboration to project-level, multidiscipline coordination, project managers, reviewers, site workers, and inspectors can view designs, perform virtual walkthroughs, query model information, and analyze embedded property data. You can automate the production of high-quality drawings, including multidiscipline documentation sets, which are consistent across the entire project. Get a live view of the project in sheet orientation. As the design changes, so will the sheets. Make edits directly in the design model and the application will update the sheets.
OpenRoads is all you need for geometrics, survey, drainage, utilities, quantity takeoff, cut/fill, site grading, lane configurations, and mobility. Ensure visibility into overall project performance with design-time analytics to achieve optimized design outcomes for a wide variety of analysis such as drainage, terrain, safety, grading, site visibility, and more. Roadway designers and engineers require software that seamlessly collaborates across disciplines, addresses growing industry demands, and includes automation to remove tedious manual work. Whether you need to produce traditional 2D deliverables, advance to 3D modeling, support digital transformation, or all the above, OpenRoads is the choice for road design.
Even as the transportation industry is moving towards the creation of 3D models, the need for a variety of deliverables continues to be part of the project workflow. With OpenRoads, you can create whatever deliverables you might need. Experience your designs in real time with constraint-driven templates, a context sensitive intuitive interface, and dynamic 3D modeling. Visualize the design at any time and on demand within the modeling workflow. No translations, software, or special workflow process is needed. Whether it is 2D or 3D, plans or models, digital or paper, OpenRoads is designed to allow you to work in all these arenas simultaneously, leveraging information from one to help populate the other. Our 3D models can be leveraged for 4D scheduling and 5D cost estimation, bringing your design to constructed fruition, on time and on budget.
OpenRoads Designer
Bentley Systemsis a software development company that supports the professional needs of those responsible for creating and managing the world’s infrastructure.
Setup_OpenRoadsDesigner_x64_10.10.21.04.exe – online install
OpenRoadsDesigner.10.10.21.04.LanguagePack.ALL
OpenRoadsDatasets.Update.10
OpenRoads Datasets for Connect Edition Update 10 (10.10.xx.xx – November 2021-March 2022)
Countries : Australia and New Zealand , Denmark, Great Britain, India, Malaysia, Singapore, Russia, France, Hong Kong
Download From UploadCloud
DOWNLOAD FROM UPLOADCLOUD
DOWNLOAD FROM UPLOADCLOUD
DOWNLOAD FROM UPLOADCLOUD
DOWNLOAD FROM UPLOADGIG.COM
DOWNLOAD FROM UPLOADGIG.COM
DOWNLOAD FROM UPLOADGIG.COM
DOWNLOAD FROM RAPIDGATOR.NET
DOWNLOAD FROM RAPIDGATOR.NET
DOWNLOAD FROM RAPIDGATOR.NET
DOWNLOAD FROM NITROFLARE.COM
DOWNLOAD FROM NITROFLARE.COM
DOWNLOAD FROM NITROFLARE.COM