Let’s try! Introduction to Fusion360 CAM Lathe basics by Minoru Ishii
English | 2022 | ISBN: N/A | ASIN: B0BJNZWHWS | 106 pages | EPUB | 10 Mb
Created as an e-book for beginners starting 3DCAM with USION360.
The first installment introduces basic operations such as creating a turning model, roughing the end face and outer diameter, finishing the end face and outer diameter, and machining simulation.
It is created with the intention of using it and remembering it. Everyone, let’s have fun learning and mastering 3DCAM!
CHAPTER1 Introduction
1.1 Features of Fusion360
1.2 Main features
1.3 About Toolpaths
1.4 CAD/CAM cooperation
1.5 Simulation function
1.6 Post-processor
1.7 Downloading Fusion360
1.8 Installation and setup
CHAPTER2 Basic operation
2.1 Open the sample model
2.2 How to use the middle button
2.3 Using the left button
2.4 Using the right button
2.5 Close the sample model
CHAPTER3 Create a model
3.1 Saving documents
3.2 Sketch
3.3 Create a revolving boss
3.4 Fillets
3.5 Chamfer
CHAPTER4 Set up
4.1 Switching workspaces
4.2 Creating a setup
CHAPTER5 Rough processing
5.1 Roughing of end faces
5.2 Roughing of outer diameter
CHAPTER6 Finishing
6.1 End Face Finish
6.2 Outer diameter finish
CHAPTER7 Simulation
7.1 Starting the simulation
7.2 Basic operation of simulation
7.3 Information
7.4 Statistics
CHAPTER8 Program output
8.1 Post-processing
8.2 Viewing Programs
8.3 Processing instructions
CHAPTER9 Recalculation
9.1 Modification of shape
9.2 Updating machining paths
Download From 1DL
DOWNLOAD FROM 1DL.NET
DOWNLOAD FROM RAPIDGATOR.NET
DOWNLOAD FROM NITROFLARE.COM
DOWNLOAD FROM UPLOADGIG.COM